Skip to main content

CARDEV 1S-24V
Offline Filtration System

Description

The 1S-24V is ideal for restricted-access applications where the system can be carried into position.

Supplied with 1x SDFC Filter Element.

Features include:

  • Simple to install and use
  • 24v DC powered pumpset
  • Designed for continuous operations

For more information call us on
01423 522911

Features

  • Simple to install and use
  • 24v DC powered pumpset
  • Designed for continuous operations

Application

  • Earth moving machines
  • Forestry equipment
  • Mobile plant
  • Diesel fuel filtration
  • Drilling/piling equipment
  • Service vehicles

Specifications

Dimensions (mm):

H: 315 W: 237 L: 217

Flow Rate (l/m):

50 l/m

Max Operating Temperature:

60℃

Weight (kg):

15

Filter Element Type:

Standard Fit 1 x SDFC (Oil based fluids)

Filtration Results

Water Removed

Removes free and dissolved water down to <50ppm (0.005%).

Particles Removed

100-times magnified, 1 scale mark = 10μm. Oil cleanliness maintained at better than new levels. (Down to 13/11/8 (ISO 4406: 1999) – Class 2 NAS 1638).

Filtration Results

Particles Removed

100 times magnified, 1 scale mark = 10μm. Oil cleanliness is maintained at better than new levels. (Down to 13/11/8 (ISO 4406: 1999) – Class 2 NAS 1638).

Before using CARDEV Filtration

After using CARDEV Filtration

Before And After Using CARDEV Oil Filtration

Water Removed

Removes free and dissolved water down to <50ppm (0.005%).

Without CARDEV Filtration

Not monitoring your oil is more damaging than you think.

With CARDEV Filtration

Within 1 week of installing a CARDEV Filtration system, you will notice a significant improvement with your machine.

Download the 1S-24V brochure.

Contact us now for pricing in your workshop.

Download Datasheet

    Your Name (required)

    Company Name (required)

    Your Email (required)

    Read our Privacy Notice here
    I have read your Privacy Notice concerning the processing of personal data.

    Other Products Similar To The 1S-24V

    Cleaning and recycling oil can be easy

    Industrial Vacuum Cleaner 2:00

    Designed to remove coolant, swarf and oil from machine tool sumps.

    CARDEV Filter Element Change 1:29

    Our step-by-step video shows the correct way to replace a CARDEV SDFC filter element.

    Swarf Briquetting Machines 1:45

    Swarf briquetting and coolant cleaning combined can produce some fantastic savings with a quick payback.

    Frequently Asked Oil Filtration Questions

    What is contamination?

    Contamination can be broken down into three basic forms – Particulate, Water and Air.

    Particulate is generally classified as ‘Silt’ or ‘Chip’. Silt is defined as an accumulation over time of particulates measuring less than 5 microns. The effect of Silt contamination is a slow degradation of system component performance and failure. Chips (measuring more than 5 microns) have a more dramatic effect and can cause immediate, catastrophic, unplanned and costly failures.

    Where does contamination come from?

    There are many areas where contamination can gain access into a hydraulic system, starting from as early as the build process. These include dust, welding slag, rubber from hydraulic hoses/seals, sand from castings, poor cleaning of components, and metal debris from machined components.

    Open reservoir filling points, leaking heat exchangers, poor-performing or non-existing reservoir breathers, lack of proper filtration methods and worn cylinder seals are just some of the additional areas contaminants can enter during operation.

    Another major source of contamination introduction simply happens when fresh, new, but dirty, contaminated oils are introduced. This can even happen during system top-ups.

    How are contamination levels measured?

    The following chart (ISO And NAS Cleanliness Codes) details the ISO code, relevant particle amounts and the type of application and its sensitivity level. More sensitive applications require cleaner oil to ensure reliability.

    Can I trial CARDEV Filtration?

    Absolutely. To avoid wasting anyone’s valuable time, however, we like the trial to be towards the end of the consultation process, to provide proof of concept. This means we will have gone through pricing with you, and we will have established criteria for a successful trial.

    Why buy more oil when you can recycle the oil you have using CARDEV Filtration

    Contact us now for pricing.

    Tell me more about CARDEV Filtration

    Need help

    Call one of our Filtration specialists now.
    Call 01423 511 911.

    ETL Shop

    Visit our online shop for the latest products and accessories.

    Personal Setup

    We’ll show how to get the best out of your CARDEV and MOTOREX products.