SwissCut Micro ALU
SWISSCUT MICRO ALU is a minimum-quantity lubricant coolant (called MQL) suitable for high-pressure spray systems. This cutting oil does not contain either mineral oil or additives such as chlorine, phosphorous, sulphur, silicone or heavy metals. It only uses vegetable base fluids. Its quality characteristics, which are particularly relevant for cutting operations, are due to its excellent wettability and lubricating effect.
Area of application
Swisscut Micro Alu, suitable for metalworking operations involving both cutting and shaping. Processes for which Micro Alu is particularly suitable include sawing/drilling/milling, forming and tapping threads, punching and nibbling. To be used for machining aluminium, aluminium alloys and composite materials.
- Improvement in tool life and the quality of surface finish
- Improvement in the performance and capacity utilisation of tools and machines
- Only small amounts required
- Dry machines, tools, workpieces and chips
- Clean workplaces
- Environmental advantages and disposal problems avoided
Back to back trials of the Motorex UX550 coolant gave us 37 components per edge against 7 components per edge with our old coolant. Same machines, same material, same components, same feeds and speeds. The ETL Fluid Experts engineer just gave my machine a thorough clean and filled with the Motorex coolant. Top up has been minimal and the machine is still fresh and clean XX months later. The performance, as well as the financial benefits, have convinced us to convert the whole workshop over to Motorex.
Coolant Mixing Stations capable of delivering via distribution pipework systems or locally via dispensing gun. Fast delivery, accurate mixing.
MOTOREX SUPERGLISS K contain surface-active substances, which improve the coefficient of friction and even prevents stick-slip at slow feed rate and heavy loads.