SwissCut ORTHO S
SWISSCUT ORTHO S Fluids are multipurpose oils based on low-aromatic mineral oils. They contain active substances to combat ageing and corrosion as well as EP additives. This improves mechanical loadability and separation performance during cutting operations. The SWISSCUT ORTHO S series of cutting oils is light, low-evaporation oils with a mild odour. Even under unfavourable working conditions, they tend neither to foam nor to form an excessive amount of oil spray. Oils in the SWISSCUT ORTHO S range are free of chlorine and heavy metals.
Area of application
Preferential application as cutting oil on automatic lathes, multi-spindle machines and for grinding as well as gear-cutting operations such as hob cutting and gear tooth grinding.
- Ageing stability
- Does not irritate the skin
- Low formation of vapor
- Good utilisation of the machine performance
- Excellent surface finishes
- Dimensional accuracy of the work pieces
- Long tool life
- Rationalisation because suitable for machine lubrication
Back to back trials of the Motorex UX550 coolant gave us 37 components per edge against 7 components per edge with our old coolant. Same machines, same material, same components, same feeds and speeds. The ETL Fluid Experts engineer just gave my machine a thorough clean and filled with the Motorex coolant. Top up has been minimal and the machine is still fresh and clean XX months later. The performance, as well as the financial benefits, have convinced us to convert the whole workshop over to Motorex.
Coolant Mixing Stations capable of delivering via distribution pipework systems or locally via dispensing gun. Fast delivery, accurate mixing.
MOTOREX SUPERGLISS K contain surface-active substances, which improve the coefficient of friction and even prevents stick-slip at slow feed rate and heavy loads.