NatureProof HLP S
View HLP S
- Fully synthetic, zinc-free and environmentally friendly high-performance multigrade hydraulic fluid
- Based on saturated synthetic esters with high-performance & long-life additives
- Rapidly biodegradable
- Excellent thermal-oxidative stability
- Hydrolytic stability for excellent corrosion and wear protection
- Improved ageing behaviour and formulated for long-term application (Life-Time-Fill) -> CO₂-reduction
- Assures the performance and increases the efficiency of your machine
- Excellent viscosity-temperature behaviour
- Very good seal compatibility
- Employed by numerous machine and component manufacturers
Viscosity class
ISO VG 32, 46, 68
Approvals
- Bosch Rexroth Fluid Rating List RDE 90245
(Viscosities 32, 46 and 68).
NatureProof HLP EL
View HLP EL - Soon
- Fully synthetic, zinc-free and environmentally friendly high-performance multigrade hydraulic fluid
- Based on saturated synthetic esters with high-performance & long-life additives
- Rapidly biodegradable
- Excellent thermal oxidative stability
- Hydrolytic stability for excellent corrosion and wear protection
- Improved ageing behaviour and formulated for long-term application (Life-Time-Fill) -> CO₂-reduction
- Assures the performance and increases the efficiency of your machine
- Excellent viscosity-temperature behaviour
- Excellent seal compatibility
Viscosity class
ISO VG 32, 46, 68
Approvals
- Bosch Rexroth Fluid Rating List RDE 90245
(Viscosities 32, 46 and 68). - EU Ecolabel
Frequently Asked Questions About Gas Engine Oils
Where is bio hydraulic oil needed?
Typical areas of application are
- Ecologically sensitive areas
- Water protection areas
- Agriculture
- Forestry
- Municipal economy
Biodegradable hydraulic oils are used as hydraulic fluids in hydraulic systems. They are primarily required for outdoor work when a loss of hydraulic oil from the system, e.g., due to leaks, cannot be ruled out.
Can you mix bio hydraulic oils?
From an application point of view, mixtures of different types of oil should be checked very carefully. The closer the formulations of the products are, the fewer negative consequences can occur. Precise knowledge of the product previously used is therefore essential, even if this rule is often ignored in practice. Questions about the previous oil condition should also be answered. If, for example, the water content is too high due to leaks or a long period of use, it is not only the oil condition that suffers. In these cases, the hydraulic oil usually already has an impact on the implement. This can result in sludge build-up, filter problems or damage due to corrosion. In many cases, it makes sense to change the oil completely to prevent potential problems and protect the expensive machine.
