Skip to main content

MOTOREX SwissCool Magnum UX 550
Stays cool, even at peak performance


SwissCool Magnum UX 550 is an universally applicable, water-miscible, mineral oil containing cutting fluid. Free from chlorine, boron and formaldehyde. The high-quality emulsifier system, state-of-the-art technology and excellent lubricating components allow a wide range of applications. Suitable for light to heavy-duty machine operations.


  • Free from boron and formaldehyde
    – mild formulation
    – good skin compatibility, no hazard labeling
  • Excellent cutting performance
    – suitable for difficult to machine materials
  • Low consumption
    – top up 1%
  • Water hardness
    – forms stable and low foam emulsions with preparation water from 10dH to 30dH
  • Complies with current legislation
    – meets the requirements of TRGS 611

Contact Us

25 Litre

60 Litre

200 Litre

If you have any questions, feel free to contact us on

+44(0)1423 522 911

or email

[social_buttons full_width_icons=”” facebook=”true” twitter=”true” google_plus=”true” linkedin=”true”]

7 Reasons Why You Should Use SwissCool Magnum UX

Can be used for all materials

Produces very little foam, even with soft water and at high pressures

For high machining performance, excellent surfaces and clean machines

The formulas comply with current European directives and are future-proof

Cost-effective use, as only minimal topping up is required

Stable emulsions give lubricating coolant a long service life, even without the use of expensive additives

Natural odour and kindness to the skin make it popular with machine operators

Interested in a FREE trial?

We’d love to clean and fill one of your machines with MOTOREX Premium Coolant for FREE!

Our cleaning procedure includes:

System cleaner added to your machine.

Old coolant removed, sump and interior cleaned. Conveyor also cleaned if fitted.

Machine filled with weak solution of new coolant (1 or 2%) and circulate to flush out residues of old coolant.

Fully empty coolant wipe down all surfaces.

Refill system as recommended by fluid supplier.

Update coolant monitoring charts for HSE.


Back to back trials of the Motorex UX550 coolant gave us 37 components per edge against 7 components per edge with our old coolant. Same machines, same material, same components, same feeds and speeds. The ETL Fluid Experts engineer just gave my machine a thorough clean and filled with the Motorex coolant. Top up has been minimal (1%) and the machine is still fresh and clean 6 months later. The performance, as well as the financial benefits, have convinced us to convert the whole workshop over to Motorex.


Coolant Mixing Stations capable of delivering via distribution pipework systems or locally via dispensing gun. Fast delivery, accurate mixing.

View Product


MOTOREX SUPERGLISS K contain surface-active substances, which improve the coefficient of friction and even prevents stick-slip at slow feed rate and heavy loads.

View Product

Fluid Transfer Unit – FTU

Portable transfer unit for draining / filling sumps, as well as removing particle contamination without any machine downtime.

View Product

If you have any questions, feel free to contact us on

+44(0)1423 522 911

or email

[social_buttons full_width_icons=”” facebook=”true” twitter=”true” google_plus=”true” linkedin=”true”]