SWISSCUT MICRO FERRO is a minimum-quantity lubricant/coolant (called MQL) made of vegetable base oils and for use in high-pressure spray systems. This cutting oil produces a fine spray mist. It is characterised by its excellent lubricating performance yet only very small amounts of the product are required. It is free of chlorine, sulphur and heavy metals.
Area of application
Swisscut Micro Ferro is primarily used to machine conventional and fine steels, excellent for turning, milling, drilling and shaping.
- Free of chlorine, sulphur and heavy metals
- Only small amounts required
- Optimum lubricating effect
- Excellent spray performance
- Clean and dry machines
- No degreasing of workpieces
Back to back trials of the Motorex UX550 coolant gave us 37 components per edge against 7 components per edge with our old coolant. Same machines, same material, same components, same feeds and speeds. The ETL Fluid Experts engineer just gave my machine a thorough clean and filled with the Motorex coolant. Top up has been minimal and the machine is still fresh and clean XX months later. The performance, as well as the financial benefits, have convinced us to convert the whole workshop over to Motorex.
Coolant Mixing Stations capable of delivering via distribution pipework systems or locally via dispensing gun. Fast delivery, accurate mixing.
MOTOREX SUPERGLISS K contain surface-active substances, which improve the coefficient of friction and even prevents stick-slip at slow feed rate and heavy loads.
Fluid Transfer Unit – FTU
Portable transfer unit for draining / filling sumps, as well as removing particle contamination without any machine downtime.